Burn Your Waste Gas & Eliminate Methane

Get methane reduction technology that is far more effective (and clean) than traditional flaring

Let's talk about lowering methane emissions from your site

  • Customized incinerator for TOTAL COMBUSTION
  • No smoke, odor, or visible flame
  • Multiple inlet valves for variable flow
  • Rental applications include: pigging, pipeline blow downs, oil batteries and plants, bulk transport tanks, storage caverns, completion, and well-testing.
  • Purchase applications include: tank vapors, gas storage, dehydrator vapor, separator gas, casing gas, BTEX vapors, pipeline pigging stations, tanker loading stations.

Enclosed Flame, No Emissions, Full Compliance

Used by over 300 companies worldwide, including:

Frequently Asked Questions

It’s crucial to chat with the area rep about your specific needs so we can correctly size the right unit for your site.

That said, here are some common questions and the (general) answers:

How does the incinerator system work?

Your waste gas goes through the manifold to the unit. The gas is then burned on the base of the unit and then more gas is sent to the rings of the unit and so the gas is burned all the way to the top of the stack. The burners are designed to be premixing burners to make sure air is premixed with the waste gas before its burned. The manifolds can be split and the unit can be semi automated to adapt to variable flow rates. With low pressure applications, venturi drives are added to the base burners to enhance/encourage combustion and eliminate back flash.

Can the incinerator burn “X” type of gas?

TCI has several incinerator styles. The Amine unit handle inert gas applications (i.e less than 40% methane, ethane, propane, butane). The regular unit can handle burnable (high in methane – over 40%) and rich gas (40 plus percent of propane, butane, etc). The rental units currently handle less than 1% H2S waste gas, burnable and rich gas (over 40% c1- c4). The purchased incinerators can handle up to 20% H2S.

Can the incinerator burn “X” amount of gas?

Each unit ranges from 15 mscfd (0.24 e3m3/day) – 6700 mscfd (190 e3m3/day) – based on pure methane going through the unit, but the actual gas capacity would depend on the type of gas. Nominal capacities of each unit on the purchase side is 7.2 mscfd (0.2 e3m3/day) – 3800 mscfd (110 e3m3/day) based on pure methane going through the unit, but again the actual gas capacity would depend on the type of gas.

What pressure can the incinerator handle?

That depends on the type of unit. Amine style can handle low pressure – under 4 oz/in2. Regular units can handle pressure of – 4 oz/in2 and above.

Where are you located & how long have you been in business?

TCI Incinerators has been in business since 1998.

Our manufacturing facility and head office is in Red Deer, Alberta.

We also have field offices in Calgary (AB), Grande Prairie (AB) and Weyburn (SK).